Causes of Damage of Common Key Switches
Release time：2019-06-15 Clicks： Click
What is the reason for the damage of the common button switch? In order to answer your questions, the following is a detailed introduction.
Sometimes the key switch will be damaged, so what is the cause of the damage? Let's take a look at it.
The key switch is generally used for manual operation of the switch structure, but not for mechanical detection function. When the key switch is operated, if the specified load is applied, the switch will be damaged. Avoid from side to side according to the usage of operation department. For the flat rod type, press the button switch center as far as possible. For the hinge structure, the pivot rod will move when the key switch is pressed. If corrosive gas button switch is produced by the surrounding material of the whole machine which uses the switch, it may cause bad contact.